|
MURPHY PowerView PVCAN Gauges J1939 CAN/MurphyLink
PVCAN模拟仪表
PowerView-CAN仪表（PVCAN）是一系列智能仪表，用于显示通过SAE J1939通信广播的易读信息。这些仪表被设计成直接连接到J1939控制器局域网总线，而不需要另一个驱动它们的设备。PVCAN仪表包括270度扫描指针的平滑步进电机操作、一个环境密封的外壳，外壳内有两个Deutsch DT型连接器和绿色LED背光。The PowerView CAN Gages (PVCAN) are a series of intelligent gages designed to display easy-to-read information broadcast over the SAE J1939 communications. These gages are designed to be wired directly to the J1939 CAN bus without the need of another device driving them.The PVCAN gage includes features such as a smooth stepper motor operation for the 270-degree sweep pointer, an environmentally sealed case with two Deutsch DT style connectors molded into the case and green LED backlighting.
 产品型号：PVCAN
PowerView™ J1939 Display & Gauge Systems
PVCAN series analogue gauges
PVCAN仪表产品详细介绍:
* SAE_J1939通讯接口，可直接读取发动机参数
* 内置微处理器
* 超高精度表针
* 270°表针范围
* 2寸/3寸安装尺寸可选
* 12/24VDC系统适用
* IP68防护等级
* -40~85°工作温度
Specifications
- Power Supply Input Voltage : 12/24V (8- 32VDC Minimum and Maximum Voltage)
- Power Supply Operating Current : Typically 70mA
- Backlight Maximum Current : 45mA
- Input : CAN (SAE J1939)
- Operating Temperatures : -40°F to 185°F (-40°C to 85°C)
- Storage Temperatures : -76°F to 185°F (-60°C to 85°C)
- Dial : White numerals over black background
- Gage Accuracy : Better than ±1% of full scale
- Environmentally Sealed Enclosure : IP68: ±5PSI (±34.4kPa).
- Case Material : Polycarbonate/Polyester (PC+PBT)
- Clamp Material : Polyester (PBT)
- Lens Material : Polycarbonate
- Bezel Material : ABS
- Maximum Panel Thickness : 3/8 in. (9.6mm)
- Connectors : 6-Pin Deutsch DT06 Series
PowerView PVCAN is a series of intelligent gauges designed to display easy-to-read information broadcast over the SAE J1939 communications. These gauges are wired directly to the J1939 CAN bus, without the need of a display, interface or other device to drive them.
PVCAN gauges include features such as a smooth stepper motor operation for the 270° sweep pointer, environmental sealing to IP68 including two Deutsch DT style connectors molded into the casing, and green LED back lighting. They are available for standard 2-1/6” (52mm) and 3-3/8” (86mm) diameter hole sizes. In addition, their polycarbonate cases incorporate a “D” shape allowing panel cutouts that eliminate gauge rotation during installation.
All PowerView gauges can be powered by 12 or 24 VDC systems.
The PowerView CAN Gages (PVCAN) are a series of intelligent gages designed to display easy-to-read information broadcast over the SAE J1939 communications. These gages are designed to be wired directly to the J1939 CAN bus without the need of another device driving them.
The PVCAN gage include features such as a smooth stepper motor operation for the 270° sweep pointer, an environmen?tally sealed case with two Deutsch DT style connectors molded into the casing, and green LED back lighting. They are available for standard 2-1/6” (52mm) and 3-3/8” (86mm) diameter hole sizes. In addition, their polycarbonate cases incor?porate a “D” shape allowing panel cutouts that eliminate gage rotation during installation.
All PowerView gages can be powered by 12 or 24 VDC systems.
PVCAN Series Models: 2 inch size gagesSpecifications Power Supply Input Voltage:
PVCAN20-A = Engine Oil Pressure 12/24V (8-32VDC Minimum and Maximum Voltage) PVCAN20-B = Coolant Temperature Power Supply Operating Current:
PVCAN20-C = Voltmeter Typically 70mA
PVCAN20-D = Percent Load at Current RPMBacklight Maximum Current: 45mA
PVCAN20-E = Transmission Oil PressureInput: CAN (SAE J1939)
PVCAN20-F = Transmission Oil TemperatureOperating Temperatures:
PVCAN20-G = Engine Oil Temperature -40° to 185°F (-40° to 85°C)
PVCAN20-H = Hydraulic Oil TemperatureStorage Temperatures:
PVCAN20-J = Percent Fuel Level -76° to 185°F (-60° to 85°C)
PVCAN20-K = Boost Pressure Dial:PVCAN20-L = Exhaust Gas Temperature White numerals over black background
PVCAN20-M = Intake Manifold TemperatureGage Accuracy:
PVCAN20-N = Auxiliary Temperature Better than ±1% of scale PVCAN20-P = Auxiliary Pressure Environmentally Sealed Enclosure:
PVCAN20-T = Tachometer IP68: ±5PSI (±34.4kPa). Case and Clamp Material: Polyester (PBT)
Lens Material: Polycabonate PVCAN Series Models: 3.5 inch size gages Bezel Material: ABS
Maximum Panel Thickness: 3/8 in. (9.6mm)
PVCAN35-T = Tachometer
Connectors: 6-Pin Deutsch DT06 Series PVCAN35-S = Speedometer
For more information about this product, you can download the related literature here:
|
